T-GAGE M18T Serisi—Analog

< Geri dï¿½nï¿½n

ï¿½rï¿½n Etiketleri: Sıcaklık sensörü Banner

ï¿½rï¿½n Bilgilerini Paylaï¿½ï¿½n |

ï¿½rï¿½n Spesifikasyonlarï¿½
ï¿½rï¿½n Fotoï¿½raflarï¿½
ï¿½rï¿½n Dï¿½kï¿½manlarï¿½
ï¿½rï¿½n Sertifikalarï¿½
ï¿½lgili ï¿½rï¿½nler

ï¿½rï¿½n Spesifikasyonlarï¿½

Supply Voltage	Discrete models : 10 to 30V dc (10% max. ripple); 35mA max.(exclusive of load) Analog models : 12 to 30V dc (10% max. ripple); 35mA max. (exclusive of load)
Wavelenght	8 to 14 µm
Output Configuration	Discrete models : bipolar : one NPN (current sinking) and one PNP (current sourcing) in each model Analog models: Analog 0-10V Alarm: PNP (current sourcing)
Output Protection	Protected against short circuit conditions
Output Raitings	Discrete models : 100 mA max. (each output) OFF- state leakage current: NPN : less than 200 µA; PNP : less than 10 µA NPN saturation : less than 200 mV @ 10 mA ; less than 1V @ 100 mA Analog Models : Analog : 2.5 (k.ohmn) min. Load resistance Alarm : OFF-state leakage : less than 10 µA Saturation : less than 1.2V @ 10 mA and less than 16V @ 100 mA
Output Response Time	Discrete models : 25 miliseconds Analog models: 75 miliseconds (for a 95% step change)
Delay at Power-up	1.5 seconds
Repeatability (Relative)	Discrete models: 1 ° C Analog models: ± of measurment, or ± 1° C ,whichever is greater
Minumum Taught Differential	Discrete models: 3° C Analog models: 10 ° C
Hysteresis (Discrete only)	5% of taught differential (min 1° C )
Linearity (Analog only)	From 0° to 50° C :±2° C From 5° to 300° C :±1° C or ±1% , whichever is greater
Adjustments	TEACH-Mode programming
Indicators	One bicolor (Green/Red) status LED,one Yellow LED Power ON/OFF LED OFF Power is OFF On Green Sensor is Run mode ON Red TEACH is active Output LED OFF Run Mode: Output is OFF Teach Mode: Waiting for output OFF condition ON Yellow Run Mode: Outputs are energized Teach Mode: Waiting for Output ON condition Flashing Yellow Dynamic TEACH active
Remote Teach Input	Impedance: 3 (k.ohmn)
Construction	Threaded barrel: 304 stainless steel Push button housing: ABS/PC Lightpipes: Acrylic Push button: Santoprene
Operating Temperature	-20° C to +70° C
Environmental Rating	Leakproof desing is rated IEC IP67; NEMA6
Temperature Warm-up Time	5 minutes
Temperature Measurement Range	0° C to 300 ° C standart;custom range available

ï¿½rï¿½n Fotoï¿½raflarï¿½

ï¿½rï¿½n Dï¿½kï¿½manlarï¿½

Aï¿½ï¿½klama	Dï¿½kï¿½man
T-GAGE M18T Serisi, Analog Çıkış	(PDF)
T-GAGE M18T Serisi, Discrete Çıkış	(PDF)

ï¿½nemli hatï¿½rlatma
Yukarï¿½daki belgeler sadece Adobe Acrobat Reader programï¿½ vasï¿½tasï¿½ ile aï¿½ï¿½labilir. Bu belgeleri sorunsuzca gï¿½rï¿½ntï¿½leyebimeniz iï¿½in Adobe Acrobat Reader programï¿½nï¿½ ilgili linkten indirip, bilgisayarï¿½nï¿½za kurmuï¿½ olmalï¿½sï¿½nï¿½z.